|Package Dimensions||13.5 x 8 x 6 cm; 220 Grams|
|Item Model Number||TS80P|
|Colour||TS80P Complete Kit|
|Item Package Quantity||1|
|Item Weight||220 g|
SainSmart TS80P Portable Soldering Iron with TS-B02 Tip & 9V/12V Charger USB Type C Cable, Adjustable Temperature, Auto Sleep Mode, Fast Internal Heating, OLED Display, Upgraded Complete Kit
|Price:||+ $10.05 Delivery|
Enhance your purchase
|Item weight||0.22 Kilograms|
|Upper temperature rating||400 Degrees Celsius|
About this item
- Upgraded Version: TS80P is the upgrade version of TS80 Portable Soldering Iron. It is powered by USB Type-C interface and PD2.0/QC3.0 standard input, which can be powered by charging plugs, power banks and mobile power supplies that comply with the PD2.0 (12V 3A)/QC3.0 (9V 2A) protocol.
- Faster Heating: The output power of TS80P has been increased from 18W to 36W max. It can heats up in only 8s from room temperature to 300°C (572℉), which is 10s faster than TS80. It’s equipped with an OLED screen, you can monitor the status of the soldering iron at any time.
- Smart & Safe: With a built-in STM32 chip, TS80P can smartly control the rise and fall of tip temperature, and features sleep, automatic power-off, safety protection and other modes. The code application layer is open source
- you can develop firmware for the soldering iron freely as needed.
Frequently bought together
Have a question?
Find answers in product info, Q&As, reviews
Your question might be answered by sellers, manufacturers, or customers who bought this product.
Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
TS80P is the upgraded version of TS80 electric soldering iron. It adopts a new easy-to-push soldering iron fastening ring, which makes it easier to quickly replace the soldering iron tip. TS8OP uses USB Type-C interface and PD2.0/QC3.0 power supply. The output power is 30W while TS80 is only 18W. TS80P can heat up to 300°C in only 8 seconds.
Temperature Range: 100°C - 400°C (Max)
Power Input: 9V/2A (QC 3.0) / 12V 3A（PD2.0）
Power: 36W Max
Fastest heating time (from room temperature to 300°C): 8s
Data/Power Interface: USB Type-C
Temperature stability: ±3%
Length: controller: 96mm; tip: 100mm(60+40mm)
Weight: 38g (power adaptor not included); Tip: 14g (B02 tip)
Certifications: CE, FCC
WHAT'S IN THE PACKAGE?
1 x SainSmart TS80P Soldering Iron Controller
1 x TS-B02 Soldering Iron Tip
1 x Type-C Cable
1 x Power Plug Adapter
1 x Safety Ground Wire
1 x English User Manual
1 x Allen Key
Review this product
Top reviews from other countries
Cons: The tip of the soldering iron does not get hot enough; measuring tip temperature showed that it was not actually at the temperature indicated on the LCD display, making it very difficult to de-solder parts as the tip would not get hot enough. Also, the soldering wand would visually bend when only a small amount of pressure was applied to the tip, making the longevity of this product very questionable. Also only came with one pointy tip, and no wedge tip.
That cable is garbage just turning on the screen and not the heater that cable nearly burned in two. It's extremely undersized and cannot handle the current. Just get a different cable and you're good.
Found out my unit already has the latest firmware, so I tried using it right away and it doesn't heat up. Watched their video on how to use it and found you have to adjust the settings to tell it what temperature to heat it up to. But, when I try to go into the settings it just restarts over and over every time I press the settings button. Then found out it restarts no matter which button I press. So I tried reinstalling the latest firmware version, no good. Tried installing the only previous firmware version available to download, no good. Tried updating it to the latest version again, no good. Apparently mine is a dud, and the forums are so hard to navigate and read I don't have much hope for getting support.
WOW its amazing. I'd have to say its better than my Hakko 888d!